|
Technical Data
- Application - The VOTOMASSA
COATING is used for wall coating. Indicated
for coating concrete blocks, ceramics and siliceous
limestone masonry. In all external areas it
is necessary to apply concentrated binder. Concrete
substrates (internal and external areas) must
also have concentrated binder. For this type
of application we recommend the use of VOTOMASSA
CONCENTRATED BINDER.
- Composition – Limestone
artificial sand with controlled particle sizing,
portland cement, hydrated lime and special chemical
additives.
- Classification - ABNT - NBR
13281/01 II - High - c
- Apparent Density –
1.50 to 1.55 g/cm
- Fresh Density – 1.65
to 1.85 g/c
- Compressive strength to 28 days
- NBR 13279/95 4.5 Mpa
- Tensile bonding strength to 28 days
- NBR 13528/95 > 0.30 Mpa
- Water-Retention Capacity
- NBR 13277/95 97 %
- Air Content - NBR 13278/95 22
to 28 %
- Water Addition - 15%
- Yield – by cm thick
(real consumption may vary according to application)
16kg/cm
Votomassa reserves the right to modify the above specifications, without
prior notice.
|
