Use Instructions

In a clean recipient, add clean water to the powder, in the proportions shown in the packaging.

Mix until a homogeneous mortar without air pockets is formed. After mixing, leave the mortar resting for 10 minutes and remix.

Dampen the joints and the ceramic borders before filling joints, to assist the hydration of cement. In porous ceramics, hot days or those with low relative humidity of air, dampen heavily.

This procedure will avoid the scattering of the product

Fill joints with the finish trowel spreading the product only in the areas of the joints and pressurizing the mortar inside to obtain complete filling up. Remove the product excess approximately in a period of 15 to 30 minutes using a damp and clean soft sponge, stretching out the material without compressing it.

When the grout is firm pass a clean and damp sponge.

After 30 minutes, pass a damp and clean cloth to eliminate the grout residues. The final cleaning must be made after 3 days of the grout application, with a cloth, clean water and soap.

IMPORTANT

Follow the ceramics manufacturer guidelines regarding the size of the space which must be kept between pieces. The filling of joints must be carried out 72 hours after the setting of the ceramic tiles. NEVER USE ACIDS FOR CLEANING. When filling joints on floors, they will be cleared for foot traffic after 7 days. The heavy traffic will be cleared only after 28 days. Due to climatic differences during the grout drying, the joint filling must be carried out in all the area at one time, to avoid tonality differences. Not suitable for filling joints in porcelain tiles and swimming pools.