Technical Data

• Application - The VOTOMASSA PROJECTION PLASTER is a good mortar that has special features for wall coatings using mechanical application with projection gear. It is suitable for masonry projection in concrete, ceramic and limestone blocks. In all external areas, concentrated binder should be used. Concrete substrates (internal and external areas) must also be prepared with concentrated binder. For this type of application we recommend using VOTOMASSA CONCENTRATED BINDER.
• Composition - Limestone artificial sand with controlled particle sizing, portland cement and special chemical additives.
• Classification - ABNT - NBR 13281/01           II - High - c
• Apparent Density - 1.50 a 1.55 g/cm
• Fresh Density - 1.75 a 1.85 g/cm
• Compressive strength to 28 days - NBR 13279/95     4.6 Mpa
• Tensile bonding strength to 28 days - NBR 13528/95    > 0.30 Mpa
• Water-Retention Capacity - NBR 13277/95         94 %
• Air Content - NBR 13278/95                20 to 24 %
• Water Addition - 18%
• Yield – by cm thick (real consumption may vary according to application) 17kg/cm

Votomassa reserves the right to modify the above specifications, without prior notice.